Toyota Lexus All in 1 Key Programmer VIA OBD II 4D 4C Chip Smart Key USA Seller

Description

Operation instructions:
Use the main key to add the other keys:
1.Connect
the programmer to the OBD port of the car, there are some short beep
sounds after power on, it enters auto search car status.
2.Press
the start button twice to wake up the anti-theft module. When the
connection with the module is done successfully after 7 seconds, there
is a long beep 4-5 sounds (4 sounds means the system is IV K system, 5
sounds means V CANBUS system). Wait 30 seconds, there are a long beep
sounds, it means the car enter into add key state.
3.Add smart
key: put the original car key (with the logo side) access to the start
button, you should hear two beep sounds. SEC light will flash twice;
within 5 seconds, put the key close to the start button, you should hear
2 beep sound, SEC light will flash twice; after learn all the smart
key, wait 30 seconds till SEC light begin flash, and the car will close
adaptation mode automatically.
Function:
1. Use the main key to add the other keys:
Connect
the programmer to the OBD port of the car, there are some short beep
sounds after power on, it enters auto search car status.
Press the
start button twice to wake up the anti-theft module. When the connection
with the module is done successfully after 7 seconds, there is a long
beep 4-5 sounds (4 sounds means the system is IV K system, 5 sounds
means V CANBUS system). Wait 30 seconds, there are a long beep sounds,
it means the car enter into add key state.
2. Add smart key:
Put
the original car key (with the logo side) access to the start button,
you should hear two beep sounds. SEC light will flash twice; within 5
seconds, put the key close to the start button, you should hear 2 beep
sound, SEC light will flash twice; after learn all the smart key, wait
30 seconds till SEC light begin flash, and the car will close adaptation
mode automatically.
3. All the key was lost or only have vice key, need to do initialization:
Press
constantly the LED button, and plug into the OBD port of the car, after
two short beep sounds, finish press, it enters into auto search car
status.
Press the start button twice, in order to wake the
anti-theft computer. When the connection with the Computer of car is
done successfully after 7 seconds, there is a long beep 4-5 sound (4
sounds mean the system is IV K system, 5 sounds mean V CANBUS system), 5
seconds later, LED light go out. Wait 10-16 minutes,there are a long
beep sounds, and LED light flicker, it means the car enter into study
key state.
All keys lost matching mode: Add every smart key which
need to program(with the logo side)access to the start button, meanwhile
you will here two beep sound. SEC light will shine twice; After you
finisher studying all the smart keys, wait 30 seconds till SEC light
shining, the system will Auto-close study state
Toyota 4D OBD Key Programmer support models:
Toyota All models from 2003 to 2012, 4D key type only
Lexus all models from 2001 to 2009, 4D key type only.
Using Tips:
1. Must use the right new smart keymaker, and follow the right step above, otherwise you take the consequences.
2. If the device can not match the key, and LED light shining
constantly, pls clear the error code by using anti-theft system such as
T300.
3. After finishing program keys, the key can strat but the SEC
light is still turn on, maybe you use the vice key, only main key can
manually shut the study mode.
4. Don’t try to open the cover of
programmer and dash board, otherwise you will not responsible for the
repair also not accept return.
5. This machine is only provided for the legal auto repair. Otherwise you will take the above consequences.
Package list:
1 x Toyota smart Keymaker
Quality Smart Key Maker OBD for 4D Chip for Toyota and Lexus